大連數控加工模具順序
①先粗后精：即先安排粗加工，其次為半精加工，后安排精加工和光整加工。
②先基面后其他：即在各加工階段，總是先把基面加工出來，為其他表面的加工準備 好定位基準，然后再加工其他表面。
③先主后次：即在加工（除基面以外的）其他表面時，先加工零件上質量要求高的工 作表面（動模芯、型腔）和有配合要求的表面，后加工非工作表面和無配合要求的表面。要 注意在模具、夾具中有些零件上的某些表面必須在裝配過程中或裝配組合后才能進行精 加工。
④先平面后孔：一般零件上的平面輪廓尺寸都比較大，用做定位基準比較穩定可靠， 因此擬訂工藝過程時常選平面定位，并先予以加工，后加工模具分型面、臺階。
⑤一般模架先加工好，分別攻好模板、動模芯、定模芯的螺紋孔。
⑥先把動模芯、定模芯（型腔）幾何形狀、尺寸加工好再加工頂桿孔（有斜孔時先加 工斜孔）、冷卻水孔（特殊的可先加工冷卻水孔）。
⑦熱處理工序在工藝路線中的安排順序，主要取決于零件的材料和熱處理的目的要求。
Dalian CNC machining mold sequence
① First rough, then fine: that is, rough machining is arranged first, followed by semi fine machining, and then fine machining and finishing are arranged.
② First the base surface, then the others: that is, in each processing stage, the base surface is always processed first to prepare the positioning reference for the processing of other surfaces, and then the other surfaces are processed.
③ First priority, second priority: that is, when processing other surfaces (except for the base surface), the working surfaces with high quality requirements (dynamic mold core, cavity) and surfaces with fitting requirements on the parts should be processed first, and then non working surfaces and surfaces without fitting requirements should be processed. It should be noted that some surfaces on certain parts in molds and fixtures must be precision machined during or after assembly.
④ First plane, then hole: The contour dimensions of the plane on general parts are relatively large, and it is more stable and reliable to use it as a positioning reference. Therefore, when formulating the process, plane positioning is often selected and processed first, followed by processing the mold parting surface and steps.
⑤ Generally, the mold frame is processed first, and the threaded holes of the template, moving mold core, and fixed mold core are drilled separately.
⑥ First, process the geometric shapes and dimensions of the moving and fixed mold cores (cavities) before processing the top rod holes (if there are inclined holes, process them first) and cooling water holes (special ones can be processed first).
⑦ The arrangement sequence of heat treatment processes in the process route mainly depends on the material of the parts and the requirements of the heat treatment purpose.
